The Heat King Furnace maintenance tune up includes the following:

	Run furnace through complete cycle to observe		Inspect heat exchanger for cracks and leaks
	Inspect flue and diverter		Inspect combustion chamber
	Clean interior of vestibule		Check blower wheel
	Check thermostat for proper settings and tighten contacts		Check blower motor and wheel lube in applicable
	Adjust and clean pilot if applicable		Check and secure all panels
	Clean and adjust burners		Check air filter clean or replace*
	Set gas pressure		Check furnace wiring
	Check gas valve operation		Check for excess noise or vibration
	Test for gas leaks		Check combustion air sources
	Check thermocouple		Make final operational run and test
	Check safety devices		Check temperature differences
	Check fan control		Advise improvements if needed
	Check limit control

The Heat King cooling maintenance tune up includes the following:

	Check thermostat		Check and secure all panels and electrical connections
	Start and cycle unit		Check condenser fan for stability and amp draw
	Clean or replace return air filter*		Check relays and contactors
	Do routine cleaning of evaporator coil		Measure operating pressures with gauges
	Check condensate drain pan and fitting for leaks and function		Check for vibration and noise levels
	Check blower motor for stability and amp draw		Make final test run
	Lube motors and bearings if applicable		Clean outdoor unit
	Check total electrical consumption		Advise improvements as needed
	Examine parts for visible wear

A Heat King Maintenance tune up includes a water heater inspection..... plus a living space indoor air quality review..... at homeowners request.

Learn more about the importance of keeping your air duct system clean and the benefits of it here.

Payment options for your convenience:

We accept Cash, Checks, Visa, MasterCard, and Debit cards.